Tungsten steel hlobo e sebetsa ka bofubelu ba tungsten tšepe mold core customization, PTJ tungsten steel processing e fana ka mocheso o chesang oa tungsten tšepe ea mold core, punch e khubelu ea tungsten tšepe e entsoeng ka mokhoa o nepahetseng.

Li-mold tsa tšepe tsa tungsten, li-cores tsa tšepe tsa tungsten, e le karolo ea mantlha ea lisebelisoa tsa tlhahiso, li khethoa haholo ke thepa ea tsona e ntle ea 'mele. Thepa ea tšepe ea tungsten ka boeona e na le thepa e ntle le e tsitsitseng ea 'mele. Ho hanyetsa ha eona ho apara, ho hanyetsa kutu, ho thatafala ho phahameng, le matla a holimo ho etsa hore e sebelisoe haholo. Likarolo tsa mantlha tsa ts'ebetso libakeng tse ling tse khethehileng tse sebetsang ka thata, joalo ka ho koaheloa ka bofubelu, libeteri tsa matla a macha, peterole le khase ea tlhaho, ho cheka ka tlas'a lefatše, likoloi, likepe, merafo ea tšepe le tlhahiso e 'ngoe e kholo ea indasteri, hlobo ea carbide e sa sebetseng ka mochini. likarolo tse sebetsoang ke tšepe ea tungsten Ts'ebetso e ntle le bophelo ba ts'ebeletso e tšoarellang nako e telele ke ts'ebetso e sebetsang ho ntlafatsa foromo ea ts'ebetso ea tlhahiso ea indasteri. Tlhokahalo ea indasteri ea sejoale-joale ea ts'ebeliso ea lihlahisoa tsa hlobo tse sebetsang hantle e se e le ts'epo ea bohlokoa ho ntlafatseng katleho ea tlhahiso le ho khothaletsa nts'etsopele ea moruo. Bakeng sa ho koaheloa ha lithupa tse khubelu le tse chesang, liforomo tsa tšepe tsa tungsten tse nepahetseng le li-cores tsa tungsten tsa tšepe li ka etsoa ho latela litlhoko tsa tšebeliso.

Tungsten tšepe e sebetsa ka hlobo e khubelu e entsoeng ka tšepe ea tungsten ea mantlha ke ts'ebeliso ea lisebelisoa tsa tlhahiso le lisebelisoa bakeng sa linotlolo tsa Hardware. Litlhoko tsa boholo ke:
1. Φ34.98*Φ29.98*Φ13.6*Φ11.2*Φ11.15*30*R1.5,
2. Φ34.98*Φ29.98*Φ13.8*Φ11.85*Φ11.8*28*R1.5,
3. Φ34.98*Φ29.98*Φ13.8*Φ12.4*Φ12.35*30*R1.5,
Seipone se bentšitsoeng Ra0.2 sea hlokahala bakeng sa lesoba le ka hare le kentsoeng ka har'a hlobo ea tšepe ea tungsten e sebetsanang le 'mala o mofubelu oa tungsten oa tšepe ea mantlha ho etsa bonnete ba hore ho koaheloa hantle. Botsitso bo botle ba 'mele oa lisebelisoa tsa carbide tse entsoeng ka samente ke khetho e ntle bakeng sa tšebeliso ea li-cores tsa tšepe tsa tungsten tse khubelu. Tungsten steel mold e sebetsa ka bofubelu ba "tungsten steel" core customization, thepa ea 'mele ea PTJ tungsten steel mold core material ke e latelang:
1. Co content: 10% -20%.
2. Boima ba g/cm3: 14.0–14.5.
3. Ho thatafala: 87-92.0HRA.
4. Boholo ba lijo-thollo: 0.6-1.2um.
5. Matla a ho kobeha: 3200-4000MPa.
6. Elastic modulus GPA: 490.
7. Coefficient ea ho atolosa mocheso 10-6 / ℃: 5.4.
8. Litekanyo le litlhaloso tsa hlobo ea carbide e entsoeng ka samente li hlophisitsoe ho ea ka litšoantšo, 'me litlhoko tsa ho nepahala li fihla ho ± 0.002.

PTJ Cemented Carbide Production Co. Ltd Mold core processing , Litlhoko tsa boholo bo nepahetseng li ka kopana le ± 0.002, seipone se ka hare le sa ka ntle se belisoa sa hlobo ea carbide e entsoeng ka samente e kopana le Ra0.2-Ra0.4, 'me tlhahiso le ts'ebetso li etsoa ka mokhoa o nepahetseng ho latela litšoantšo tsa bareki.

Mould ke sesebelisoa se seholo sa indasteri se sebelisoang haholo tlhahisong ea indasteri. Joalo ka mokhoa oa bohlokoa le tataiso ea nts'etsopele ea thekenoloji tlhahisong ea indasteri ea sejoale-joale, nts'etsopele ea liindasteri tse ngata tsa sejoale-joale le ntlafatso ea boemo ba thekenoloji e itšetlehile haholo ka boemo ba nts'etsopele ea indasteri ea hlobo. , Haholo-holo li-mold tsa carbide tse nepahetseng tse phahameng tsa ho qetela tse nepahetseng, letoto la mantlha la tungsten steel hlobo.

Kopanya le sengoloa sena: Tungsten tšepe hlobo e sebetsa e khubelu punch tungsten tšepe hlobo ea mantlha ea tlhophiso

Phatlalatso ea Khatiso: Haeba ho se na litaelo tse khethehileng, lingoliloeng tsohle tse sebakeng sena ke tsa mantlha. Ka kopo, bontša mohloli oa khatiso hape: https://www.cncmachiningptj.com

PTJ® ke moetsi oa tloaelo ea fanang ka sebetsa ka ho nepahetseng machining le ho otlolla thekoho kenya ts'ebeliso ea metsi a hloekileng le metsi a leoatle. Bohle ba tloaelo ea tšepe ea tšepe 'me fastener. Bokhoni ba ho hlahisa bo kenyelletsa 5 selekane sebetsa ka ho nepahetseng Machining Koporo Parts, Lisebelisoa ho itšeha, CNC siloa, Lathing ea CNC, ho lla, CNC ho cheka, ho hoba, ho opa, le sebopeho sa kahare le kantle. Litšebeletso tse ling li kenyelletsa ho qeta, ho leotsa, ho sila, ho tlatsa lithapo, ho fata, ho phunya, ho otlolla le ho sakha. Tsela ea radius e khaotsoe ho ea ka litlhaloso. The theko Sistimi e sebetsanoa ka mokhoa o tloaelehileng oa SAE J755.

Re bolelle hanyane ka tekanyetso ea projeke ea hau le nako e lebelletsoeng ea ho fihla. Re tla rera leano la ho fana ka lits'ebeletso tse baballang litšenyehelo ho u thusa ho fihlela sepheo sa hau, O amohelehile ho ikopanya le rona ka kotloloho ( sales@pintejin.com ).